Email: atulmachinetools@gmail.com or Call us: +91 – 92276 02034

All Geared Medium Duty Lathe Machine

Innovation, Accuracy & Affordable

Atul Machine is a prominent firm that is engaged in manufacturing, supplying and exporting All Gear Medium Duty Lathe Machine. Our All Geared Category also contains the All Geared Heavy Duty Machines, All Geared Light Duty Machines as well. These machines are known for their seamless finish, low maintenance, longer service lives, corrosion resistance, abrasion resistance and easy mounting and installation.

The above mentioned features of our offered All Gear Medium Duty Lathe Machine are widely cherished by our patrons and thus we are one of the leading firm that is engaged in this domain.

Atul Machine Tools - Quality Light Duty Lathe Machines,Medium Duty Lathe Machines, Heavy Duty Lathe Machines & Heavy Duty Lathe Machines Manufacturers.

Product Specifications

Product Technical Specification

Description STD CH
Centre Height over flat bed ways 215 mm
Swing Over Bed 423 mm
Swing Over Cross Slide 250 mm
Swing In Gap 620 mm
Width of Bed 277 mm
ID Particulars AGM 1 AGM 2 AGM 3
1 Length of Bed 1370 mm (4′-6″) 1600 mm (5′-3″) 1830 mm (6′)
2 Admit Between Centres 450 mm 725 mm 950 mm
Main Spindle
4 Type of Spindle Nose Threaded Threaded Threaded
5 Spindle bore 38 mm 38 mm 38 mm
6 Spindle Morse Taper MT-5 MT-5 MT-5
7 Spindle Adapter Morse Taper MT – 3 MT – 3 MT – 3
8 Spindle Speeds Nos./RPM Range 8/54, 90, 140, 224, RPM. 315, 500, 775, 1200. RPM 8/54, 90, 140, 224, RPM 315, 500, 775, 1200. RPM 8/54, 90, 140, 224, RPM 315, 500, 775, 1200. RPM
9 Spindle Mounting on Taper Roller Bearings Taper Roller Bearings Taper Roller Bearings
TAIL STOCK SPINDLE
10 Spindle Diameter 50.8 mm 50.8 mm 50.8 mm
11 Spindle Travel 145 mm 145 mm 145 mm
12 Spindle Morse Taper MT – 4 MT – 4 MT – 4
LEADING SCREW
13 Diameter / Threads 31.75 mm. / 4 TPI 31.75 mm / 4 TPI 31.75 mm / 4 TPI
THREADS
14 Nos. of Threads / Metric 17 / 0.5 mm To 15 mm Pitch 17 / 0.5 mm To 15 mm Pitch 17 / 0.5 mm To 15 mm Pitch
15 Range For Fully Norton Inch(Gearbox) 40 / 2 to 60 TPI 40 / 2 to 60 TPI 40 / 2 to 60 TPI
DIMENSIONS
16 Floor Space Occupied (mm) 1650×970 1950×970 2100×970
17 Aprox. Weight in kgs. Nett-775 Gross-825 Nett-850 Gross-900 Nett-875 Gross-925
18 Aprox. Case Dimensions(mm) 2000 x 1000 x 1500 2200 x 1000 x 1500 2500 x 1000 x 1500
ELECTRICALS
Electric motor of 2 H.P. / 1.5 K.W., 3 Phase, 1440 RPM with Panel board wirings, Pushbutton
switches or Reverse – Forward Switch, V-belts and fittings.

Accessories

Standard Accessories Optional Accessories
  • Flame Hardened bed ways
  • Chuck back plate 1 no
  • centre adapter
  • Dead centres (MT – 4) 2 nos
  • Tool Post Spanner
  • Motor pulley
  • Thread dial indicator
  • Change gear set – 1 (For metric and inch both) and Norton gearbox
  • Face plate, Carrier plate, steady rest, follow rest
  • Taper turning attachment
  • Motorised coolant pump with tank and fittings
  • Rear tool post with extended cross slide
  • Chuck back plates(Extra) and Electrical (Motor, Panel board, Wiring, Push button Switches, V-belts and fittings)
  • Electrical Switch shaft and splash guard

Note:

1) As improvement are made from time to time. These specification are subject to change without prior notice and are not binding on us. inspection at our sight before delivery..

2) The descriptions of standard accessories confirms to It’s list and not the photograph of machine shown.

× How can I help you?